RGB Node Availability


The interest this project grown far beyond anything we ever imagined.

When we started out we had a few ideas about what we wanted to achieve.  We are pleased we’ve got over our own ‘line’, and are now able to ramp things up & make the technology available to everyone else.

In the process, we’ve been asked a thousand questions concerning ‘when’ and ‘how much?’

So here goes.

During 2009, we spent a lot of time (and money) researching and developing various design ideas. Where we are today is a long way down the track from the original classic pixels first released in 2005.  Our goal in 2009 was to find an affordable, reliable RGB node, suitable for large scale deployments. Getting a working design is only part of the challenge.  We’ve looked at various production options as well.

The difference in build quality between factories is significant!  Component choice is also important: inferior parts will run for a few days  or weeks, then completely or partially fail.

Sometimes cheap parts come at  a very high overall price.

Our testing will continue on some new products this year as well, but the new nodes that we have now, are performing well.

We’ve now invested a significant amount time and money ensuring our nodes will be reliable.  R&D is like that – lots and lots of sunk costs, destructive field testing, and often very little apparent result.

The nature of the Internet (and hardware hackers in general) almost certainly guarantees that someone else will find and start to sell an apparently similar product. There’s not much we can do to stop that.  And frankly, we’re not interested in trying.

Competing solely on price only leads to disappointment and frustration for all parties, and it’s not a game we’re interested in playing.

Know also that components which appear identical on a computer screen may behave in a radically different way in real life.

What we will offer – on absolutely everything that leaves the shop –  is a 100% money-back, no-questions-asked, we’ll-be-devastated-if-your-system-doesn’t-run-perfectly guarantee of support and service.  Each system will ship with a hearty helping of peace of mind.

That’s the value we’re adding to the process, and we think it’s significant.

To stay informed, just enter your name and email address in the top right corner of this page.  You’ll be the first on your block to receive  project updates.

We have got a number of other products now ready for release in 2010.  We’ve thought long and hard about how to proceed.  Our goal is to offer something useful to both the ‘DIY’ crowd and those seeking a complete turnkey solution.

Led Wall Washers and Tubes

We have some very bright tubes and wall washers that we have almost finished testing.  More details will be released as they become available.


Again, to stay updated on the project, just enter your name and email address in the upper right corner of this page.

Questions?  Comments?  Want to reserve your bits right now?  Send a quick email to ‘john AT response-box.com.’  We’d love to hear from you.

Warmest regards,

JEC & mrpackethead

New Video Footage


A couple days ago I rented a Canon EOS 7D + 28-70 F/2.8L lens, which I used to capture some footage of the house on a frozen and windy night.

The camera can shoot full-on HD video – 1080p at 30 fps.  5 minutes of footage fills a 4 GB flash card.  It’s compressed quite a bit by Youtube, but the actual color rendition is as close as I’ve ever seen.  Audio is the same as you’d hear if you visited in person.

This next picture is the physical incarnation of an idea my wife had.  She wanted snowflakes on the house.  Lots of ’em.

So we sketched up a family of flakes in the CAD program, then emailed the DXF files to the metal shop that’s just up the road.  The shop tightly arrayed the flakes on a 4′ x 10′ piece of aluminum stock, then cut them out on the laser table.

The large flake  shown here measures 23″ from tip to top and contains 83 RGB nodes on ~ 1.5″ centers.  83 nodes equals 249 channels of DMX and/or Art-Net.  So 2 per universe.

Since we left ‘practical’ behind several months ago, such a massive channel count poses no problem at all.

23" Aluminum snowflake with RGB DMX Nodes
Snowflake, fully loaded & waiting for installation.

The video clip below shows it running a simple – yet frantic – test pattern.  It’s really, really bright.

With any luck, we’ll have a whole flock of these mounted on the house after Christmas.  They’ll run through January & hopefully counteract the cold grey winter.

As always, if you’d like to hear when contact on this site changes, just enter your name and email address in the upper right hand corner of this page.  As a member of our exclusive ‘Insider Club,’ you’ll be the first on your block to receive the updates.


A Grainy Video Clip

My wife’s little Nikon point & shoot shot these clips. They’re not spectacular, but they’re at least something. Note that these clips aren’t synchronized to music, they’re just part of a larger cue stack that repeats every 10 minutes or so.

Later this week I’ll be able to post some HD video clips + audio + decent color reproduction.

Still Photos

No video yet, but here’s some stills I took of the house. The purity of the LEDs’ color cuts through the darkness like a razor.

Current count is about 612 RGB pixels, driven by 3 Art-Net bridges. For convenience, the patch is spread over 6 universes of DMX.

Rough calculations say that at full brightness, the lights draw 60 mA per node –> 36.7 A at 5V –> ~160 watts total.

Note that the two pixels on the balcony which appear to be ‘dead’ are actually blocked by the balcony’s iron handrail.

Many of the blue / purple pictures are actually part of a longer ‘plasma’ sequence which features red, blue and purple blobs sweeping across the entire house. It’s pretty neat looking in real life.

Click to enlarge.

A Mere Preview


Yesterday (Saturday) morning UPS delivered the missing link of this year’s light display: a USB dongle, used to authenticate the software which drives the LEDs.  The software can be downloaded free of charge.  However, communication with the outside world requires an decryption key.

Since then, I’ve installed and tested two Art-Net bridges, which drive about 2/3 of the existing lights.  Tomorrow morning, weather pending, I’ll add the third controller and record some decent images.

In the interim, enjoy this grainy, overexposed foreshadowing of things to come:

2009 RGB Node Preview from Engineering Solutions Inc on Vimeo.

mrpackethead’s LED Tree

New Zealand co-developer mrpackethead finished up a ‘mega tree’ using 2,000 of the new waterproof LED nodes.  It’s 6 meters high and – I’m told – absolutely stunning to experience in person.

Here’s a video clip of its maiden voyage:

Other interesting bits:

Power When fully lit, the tree draws ~ 120 A at 5.0 V DC.  He is using 10 x 100W switch mode supplies. Cost per hour to run is about $0.05 NZ.

Drive Software Quartz Composer (OS X), Madrix, walker design (compatible with vixen btw)

Note that there’s been some additional discussion of the tree / controller system on the Do It Yourself Christmas forums.